SC22 Resolutions with impact on SC22/WG20 and NCITS/L2
ISO/IEC JTC 1/SC22 approves the revised SC22
Program of Work detailed in document SC22 Nxxxx. Resolution 99‑B: SC22 Business Pla n ISO/IEC JTC 1/SC22 approves the SC22 Business Plan
contained in document SC22 N3007.
Resolution 99‑C: Extension of Trial Period for Normative Referencing of Specifications Other Than International Standards
ISO/IEC JTC 1/SC22 approves document SC22 N3008 as its response to the request from ISO/IEC JTC 1 for comments on extending the trial period for normative referencing of specifications other than International Standards and directs the SC22 Secretariat to forward this response to ISO/IEC JTC 1.
ISO/IEC JTC 1/SC22 approves document SC22 N2970 as
its response to the request from ISO/IEC JTC 1 for contributions detailing
methods for measuring the effectiveness of ISO/IEC JTC 1 accomplishments and
directs the SC22 Secretariat to forward this response to ISO/IEC JTC 1.
Recognizing that Disposition of Comments Reports should adequately address the resolution of comments provided with votes on SC22 and JTC 1 ballots;
ISO/IEC JTC 1/SC22 reminds its Working Groups of the requirements in the JTC 1 Directives on the preparation of Disposition of Comments Reports, in particular that:
1) Comments which are not accepted must be accompanied by the rationale for non-acceptance; and
2) Comments which are accepted "in principle" (i.e., where the exact wording of the suggestion is not incorporated) should be accompanied by either the exact wording which was used to satisfy the comment or a rationale sufficient to ensure that the balloter can understand the changes that are being made based on the comment.
Recognizing that additional time and expense may be incurred when dealing with Final CD ballots;
ISO/IEC JTC 1/SC22 provides the following guidance to its Working Groups when deciding whether to submit a document for CD or FCD ballot:
1) Until there is wide acceptance that all major technical issues have been resolved, a document should not be forwarded for FCD ballot.
2) Only documents which have a high probability of being progressed to FDIS processing on the next ballot, should be brought forward for FCD ballot.
ISO/IEC JTC 1/SC22 approves the request from the
ballot resolution group for DIS 16509 (Year 2000 Terminology) that ISO/IEC
16509 be made freely available and directs the SC22 Secretariat to immediately
forward this request to ISO/IEC JTC 1 along with the rationale contained in
document SC22 N2944.
ISO/IEC JTC 1/SC22 approves the request from WG20 for liaison with ISO TC 46/SC2 (Conversion of Written Languages) noting the Statement of Mutual Benefits and Responsibilities for this liaison contained in document SC22 N2922.
ISO/IEC JTC 1/SC22 approves the request from WG20 for Category C Liaison with the World Wide Web Consortium and directs the SC22 Secretariat to forward this request to ISO/IEC JTC 1 for approval, along with the Statement of Mutual Benefits and Responsibilities for liaison contained in document SC22 N2923.
Resolution 99‑J: Extension of Schedule for Project JTC 1.22.02.01.01 (Fortran
200x) ISO/IEC JTC 1/SC22, recognizing that a combination
of factors has arisen delaying the completion of the revision of ISO/IEC 1539‑1:1997
as detailed in document SC22 N2942, approves the extension by two years for
completion of this revision until 2004. Recognizing that development activity has been
discontinued; ISO/IEC JTC 1/SC22 approves the withdrawal of the following
projects, as requested by SC22/WG15: Project JTC
1.22.21.03.03 (Print Administration) Project JTC
1.22.21.01.01 (LIS System Interface). a. ISO/IEC JTC 1/SC22 approves concurrent PDTR
registration and PDTR ballots for Project JTC 1.22.02.01.02 (Revised PDTR 15580,
Floating Point Exception Handling in Fortran) a. ISO/IEC JTC 1/SC22 approves concurrent PDTR
registration and PDTR ballots for Project JTC 1.22.02.01.04 (Revised PDTR 15581,
Enhanced Data Types in Fortran). a. ISO/IEC JTC 1/SC22 approves concurrent CD
registration and CD Ballot for Project JTC 1.22.18011 (LIS - Part 1:Realtime
Distributed Systems Communication API)
d. ISO/IEC JTC 1/SC22 approves concurrent CD Registration and CD Ballot for Project JTC 1.22.15897 (Procedures for Registration of Cultural Elements).
ISO/IEC JTC 1/SC22 extends the study period of the
Java™ Study Group (JSG) until the 2000 ISO/IEC JTC 1/SC22 Plenary. The charter
of the JSG shall be to investigate potential approaches for Java-related
standardization, to consider appropriate new work item proposals, to serve as
SC22’s expert on Java-related matters, to support the SC22 liaison in the Java
standardization efforts in ECMA TC41, and to prepare a written report to the
next SC22 Plenary. ISO/IEC JTC 1/SC22 re-appoints Dr. Robert Mathis
(United States) as Convener of this Java Study Group. Resolution 99‑N: Appointment of SC22 Liaison to ECMA TC41 and to ECMA ISO/IEC JTC 1/SC22 appoints Dr. Robert Mathis
(United States) to serve as SC22’s liaison to ECMA TC41. ISO/IEC JTC 1/SC22 appoints Dr. Robert Mathis
(United States) to serve as SC22’s liaison to ECMA. ISO/IEC JTC 1/SC22: a.
Recommends that the following standards be confirmed: ISO/IEC
6160:1979 - Programming Language PL/I ISO/IEC
7185:1990 - Programming Language Pascal ISO/IEC
8652:1995 ‑ Programming Language Ada ISO/IEC
13211‑1:1995 ‑ Prolog, Part 1 b.
Recommends that the following standard be withdrawn: ISO/IEC
12227:1995 ‑ SQL Ada Module Description Language Resolution 99‑P:
Cancellation of Projects ISO/IEC JTC 1/SC22 approves the cancellation of the
following projects if the documents being developed under these projects have
not been forwarded to the SC22 Secretariat for registration ballot by
2000-01-01: 1. JTC 1.22.09.02 – Character Repertoire for APL 2. JTC 1.22.24.02 – Character Repertoire for
Extended APL. Resolution 99‑Q: Retention of Project Not Reaching CD Stage Within Three Years of
NP: JTC 1.22.34 ‑ Complex Floating Point Arithmetic and Complex
Elementary Numeric Functions ISO/IEC JTC 1/SC22 notes that while project JTC
1.22.34 has exceeded the statutory time for proceeding from NP to CD stage,
this project has shown significant progress and there is reason to suppose that
it will be completed; and Having reviewed the situation, SC22 accepts the
explanation that has been presented for the need for further time in the case
of this project ; Therefore, SC22 authorizes the extension by one
year of the time permitted for proceeding from the NP to the CD stage for
Project JTC 1.22.34. Resolution
99-R: Termination of JTC 1.22.29.02 –
Vienna Development Method/Specification, Part 2: Modules ISO/IEC JTC
1/SC22 notes that project JTC 1.22.29.02 has exceeded the statutory time for
proceeding from NP to CD stage. At this
time ISO/IEC JTC 1/SC22 terminates this subproject. However, SC22
notes: 1. The scope of
JTC 1.22.29 continues to include work related to VDM Modules; 1. Countries
interested in furthering this work are invited to continue their efforts; 1. SC22 is willing
to reconsider the subdivision of JTC 1.22.29 at that point when there are
sufficient indications of interest and activity. Resolution 99‑S: Retention of Project Not Reaching DIS Stage
Within Four Years of Reaching CD Stage ( Shell and
Utilities Amendment ) ISO/IEC JTC 1/SC22 notes that Project JTC 1.22.41
has exceeded the statutory time for proceeding from CD to DIS Stage. ISO/IEC JTC 1/SC22 notes, however, that
significant progress has been made on the project and there is no reason to
suppose that it will not be completed.
Therefore, ISO/IEC JTC 1/SC22 authorizes the extension by one year of
the time permitted for proceeding from the CD to the DIS stage for Project JTC
Dr. John Reid (UK) as Convener of WG5 (pending
confirmation from the United Kingdom Member Body). b.
Mr. Willem Wakker (Netherlands) as Convener of WG11
(pending confirmation from the Netherlands Member Body). b.
Mr. Martin Schoenhacker (Austria) as Convener of
WG13 (pending confirmation from the Austria Member Body). d.
Mr. John Benito (USA) as Convener of WG14 (pending
confirmation from the USA Member Body). d.
Mr. Pierre Parquier (France) as Convener of WG16. d.
Mr. Jonathan Hodgson (USA) as Convener of WG17
(pending confirmation from the USA Member Body).
d. Mr. Arnold Winkler (USA) as Convener of WG20.
d. Dr. Tom Plum (USA) as Convener of WG21 (pending
confirmation from the USA Member Body).
ISO/IEC JTC 1/SC22 approves Mr. Arnold Winkler as Project Editor for Project JTC 1.22.13.01 (TR 10176 AM1).
ISO/IEC JTC 1/SC22 approves Mr. Roger Scowen as
Project Editor for Project JTC 1.22.22.01 (Prolog, Base Language). ISO/IEC JTC 1/SC22 accepts the generous offer of
Japan National Body (SC22 N2984) to host the 2000 JTC 1/SC22 Plenary in Nara,
Japan on 2000-09-12/15. ISO/IEC JTC 1/SC22 expresses its gratitude and
appreciation to Dr. Miles Ellis for his many contributions as Convener of
ISO/IEC JTC 1/SC22/WG5 - Fortran. Resolution 99-X:
Appreciation: Mr. Roger Scowen ISO/IEC JTC 1/SC22 expresses its gratitude and
appreciation to Mr. Roger Scowen for his many contributions during his long
tenure as Convener of ISO/IEC JTC 1/SC22/WG17 – Prolog. ISO/IEC JTC 1/SC22 expresses its appreciation to
the Danish UNIX Users Group (DKUUG) and Mr. Keld Simonsen for continuing to so
effectively host and administer the ISO/IEC JTC 1/SC22 World Wide Web pages and
email reflectors. ISO/IEC JTC 1/SC22 expresses its appreciation to
all those who have assisted in the work of this meeting, and in particular: to Aonix, Gesellschaft fur Informatik, IBM
Deutschland Informationssysteme, Siemens AG, and Software Portfolio Management
for so generously sponsoring the dinner and boat ride for the ISO/IEC JTC
1/SC22 delegates on Tuesday, September 21, 1999; to DIN Deutsches Institut for Normung e.V., the
meeting host, for the outstanding organization of the meeting and technical
support, and especially to Ms. Ulrike Wachtendorf, Mr. Ronald Haude and Mr. Siegfried Badenmuller for their
cheerful help and support at all times; to the Danish UNIX Users Group (DKUUG), and
especially to Mr. Keld Simonsen, for setting up and maintaining the invaluable
LAN infrastructure connections in the meeting room; to the Drafting Committee members Mr. Isak Korn
(chairman), Mr. Roger Martin, Mr Akio Kido, Mr. Toshiaki Kurokawa, Dr. Miles
Ellis, and Mr. Keld Simonsen; to Mr. John Hill for chairing the Ad Hoc Group on
Increasing Participation on Working Groups; to Hr. H.-Peter Krause, Prof. Georg Thiele and
Prof. Rainer Müller for their interesting and informative presentation on
PEARL; to Mr. William Rinehuls for his management of the
ISO/IEC JTC 1/SC22 Program of Work as the ISO/IEC JTC 1/SC22 Secretariat; and
last, but by no means least, to Mr. Robert Follett for chairing the meeting for
the last time in his usual exemplary manner.
Resolution 99-AA ISO ITTF Editorial Changes to Technical Reports
ISO/IEC JTC1/SC22 requests ISO ITTF to provide any recommended editorial changes to SC22 Technical Reports to the SC22 Secretariat for review and approval during the JTC 1 ballot period, if possible, but in any case prior to finalization of the TR for publication.
ISO/IEC JTC1/SC22 expresses its gratitude and
appreciation to Mr. Johan van Wingen for his long service and his many
contribiutions as SC2 Liaison.
ISO/IEC JTC 1/SC22 appoints the following Liaisons:
a. Mr. Arnold Winkler to SC2 (Coded Character Sets),
a. Mr. Jim Moore to SC7 (Software Engineering).
ISO/IEC JTC 1/SC22 re-appoints Dr. Miles Ellis (UK)
as its Liaison Officer to JTC 1/SC29. Recognizing that the USA National Body has not yet
endorsed an individual to assume the chairman position of ISO/IEC JTC 1/SC22;
and Recognizing that the term of office of Mr. Robert
Follett has been completed; ISO/IEC JTC 1/SC22 endorses the appointment of Mr.
John Hill (USA) as Acting Chairman of ISO/IEC JTC 1/SC22.
Resolution 99-GG Participation of O Members in SC22 Working Groups
ISO/IEC JTC 1/SC22 requests ISO/IEC JTC 1 to permit participation in SC22 working groups by O members of SC22; and
ISO/IEC JTC 1/SC22 instructs its Secretariat to convey this request to ISO/IEC JTC 1.
ISO/IEC JTC 1/SC22 expresses its gratitude and
appreciation to Mr. Robert Follett for his service as Chairman of ISO/IEC JTC
1/SC22 over the past 10 years and congratulates him on a job very well
done. Mr. Follett’s leadership and
guidance have been key to SC22’s success. SC22 is grateful for Mr. Follett’s leadership which has always
been exercised with great fairness, efficiency and diplomacy. ISO/IEC JTC 1/SC22 wishes Mr. Follett the best of
good fortune in his future endeavours.