|
|
Page 1 of 1
|
[ 2 posts ] |
|
| Author |
Message |
|
emuller
|
Post subject: 2012-03-15 Conference call Posted: Thu Mar 15, 2012 7:23 pm |
|
 |
| Unicode Guru |
Joined: Fri Dec 04, 2009 9:25 pm Posts: 76
|
|
======================================================== Minutes
1. Rename the properties
- DVO to "stacked vertical orientation" (SVO) - EAVO to "mixed vertical orientation" (MVO)
2. Rename the property values
- U -> U (upright) - S -> R (rotated) - T -> T (transformed) - Sb -> R (see also 5. below) - add Tu and Tr, which indicate whether upright or rotated is acceptable as a fallback, if no transformation is available
3. Laurentiu/Dwayne to derive SVO and MVO values corresponding to their data. Their data can retain the current "unified" property value as well.
4. At least during the development phase, tailoring will be supported by the construction of sets of characters, which will be part of UTR#50.
5. Eric to add a set for Sb.
6. Open question: what should be the reference point for describing orientation: - code charts - usual appearance in horizontal lines.
7. Next conference call when 1-5 are done.
(Please respond to this topic only if it is about the minutes; if it is on further technical discussion, use a new (non-announce) topic).
|
|
| Top |
|
 |
|
TKobayashi
|
Post subject: Re: Minutes of the 2012-03-15 Conference call Posted: Sun Apr 22, 2012 5:48 pm |
|
Joined: Thu Jan 12, 2012 9:58 am Posts: 29
|
|
I have read through Revision 4 documents.
The paragraph, within 5.2 Resulting orientation, "the property values, if used, are intended to be used directly, with the value SB interpreted as equivalent to S. " should be updated.
|
|
| Top |
|
 |
|
Page 1 of 1
|
[ 2 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|