[Unicode]  Technical Reports

Unicode Technical Standard #10

Unicode Collation Algorithm

Version 6.0
Authors Mark Davis (mark.davis@us.ibm.com), Ken Whistler (ken@unicode.org)
Date 2000-08-31
This Version http://www.unicode.org/unicode/reports/tr10/tr10-6.html
Previous Version http://www.unicode.org/unicode/reports/tr10/tr10-5.html
Latest Version http://www.unicode.org/unicode/reports/tr10/
Base Unicode Version Unicode 2.1.9


This report provides the specification of the Unicode Collation Algorithm, which provides a specification for how to compare two Unicode strings while remaining conformant to the requirements of The Unicode Standard, Version 3.0.


This document has been reviewed by Unicode members and other interested parties, and has been approved by the Unicode Technical Committee as a Unicode Technical Standard. It is a stable document and may be used as reference material or cited as a normative reference from another document.

A Unicode Technical Standard (UTS) is an independent specification. Conformance to the Unicode Standard does not imply conformance to any UTS. Each UTS specifies a base version of the Unicode Standard. Conformance to the UTS requires conformance to that version or higher.

A list of current Unicode Technical Reports is found on http://www.unicode.org/unicode/reports/. For more information about versions of the Unicode Standard, see http://www.unicode.org/unicode/standard/versions/.

Please mail corrigenda and other comments to the author(s).


1 Scope

The Unicode Collation Algorithm provides a specification for how to compare two Unicode strings while remaining conformant to the requirements of The Unicode Standard, Version 3.0 (see Section 5.17 Sorting and Searching, which is Section 5.15 in Version 2.0). Readers should be familiar with that section before proceeding with the rest of this document. It also supplies the Default Unicode Collation Element Table as the data specifying the default collation order.

Note: the Default Unicode Collation Element Table is currently limited to the Unicode 2.1.9 repertoire. However, the algorithm is well defined over all Unicode code points. See §7.1.2 Legal code points.

When the table is updated to the Unicode 3.0 repertoire the ordering of a few Unicode 2.1.9 characters will change for consistency with UAX #15: Unicode Normalization Forms.

1.1 Goals

The algorithm is designed to satisfy the following goals:

  1. A complete, unambiguous, specified ordering for all characters in Unicode.
  2. A complete resolution of the handling of canonical and compatibility equivalences as relates to the default ordering.
  3. A complete specification of the meaning and assignment of collation levels, including whether a character is ignorable by default in collation.
  4. A complete specification of the rules for using the level weights to determine the default collation order of strings of arbitrary length.
  5. Allowance for override mechanisms (tailoring) for creating language-specific orderings. Tailoring can be provided by any well-defined syntax that takes the default ordering and produces another well-formed ordering.
  6. An algorithm that can be efficiently implemented, both in terms of performance and in terms of memory requirements.

Given the standard ordering and the tailoring for any particular country, any two companies or individuals — with their own proprietary implementations — could take any arbitrary Unicode input and produce exactly the same sorted output. In addition, when given a tailoring specifying French accents this algorithm passes the Canadian and ISO DIS 14651 benchmarks ([CanStd], [SoStd]).

1.2 Non-Goals

The Default Unicode Collation Element Table explicitly does not provide for the following features:

  1. reversibility: from a Collation Element you are not guaranteed that you can recover the original character.
  2. numeric formatting: numbers composed of a string of digits or other numerics will not necessarily sort in numerical order.
  3. API: no particular API is specified or required for the algorithm.
  4. title sorting: for example, removing articles such as a and the during bibliographic sorting is not provided.

1.3 Summary

Briefly stated, the Unicode Collation Algorithm takes an input Unicode string and a Collation Element Table, containing mapping data for characters. It produces a sort key, which is an array of unsigned 16-bit integers. Two or more sort keys so produced can then be binary-compared to give the correct comparison between the strings for which they were generated.

The Unicode Collation Algorithm assumes multiple-level key weighting, along the lines widely implemented in IBM technology, and as described in the Canadian sorting standard [CanStd] and the proposed International String Ordering standard [SoStd].

By default, the algorithm makes use of three fully-customizable levels. For the Latin script, these levels correspond roughly to:

  1. alphabetic ordering
  2. diacritic ordering
  3. case ordering.

A fourth level may be used for tie-breaking between strings not distinguished at the first three levels.

This design allows implementations to produce culturally acceptable collation, while putting the least burden on implementations in terms of memory requirements and performance. In particular, Collation Element Tables only require storage of 32 bits of collation data per significant character.

However, implementations of the Unicode Collation Algorithm are not limited to supporting only 3 levels. They are free to support a fully customizable 4th level (or more levels), as long as they can produce the same results as the basic algorithm, given the right Collation Element Tables. For example, an application which uses the algorithm, but which must treat some collection of special characters as ignorable at the first 3 levels and must have those specials collate in non-Unicode order (as, for example to emulate an existing EBCDIC-based collation), may choose to have a fully customizable 4th level. The downside of this choice is that such an application will require more storage, both for the Collation Element Table and in constructed sort keys.

The Collation Element Table may be tailored to produce particular culturally required orderings for different languages or locales. As in the algorithm itself, the tailoring can provide full customization for three (or more) levels.

2 Conformance

There are many different ways to compare strings, and the Unicode Standard does not restrict the ways in which implementations can do this. However, any Unicode-conformant implementation that purports to implement the Unicode Collation Algorithm must do so as described in this document.

The algorithm is a logical specification, designed to be straightforward to describe. Actual implementations of the algorithm are free to change any part of the algorithm so long as any two strings compared by the implementation are ordered the same as they would be by the algorithm. They are also free to use a different format for the data in the Collation Element Table. The sort key is also a logical intermediate object: so long as an implementation produces the same results in comparison of strings, the sort keys can differ in format from what is specified here. (See §6 Implementation Notes.)

The requirements for conformance on implementations of the Unicode Collation Algorithm are as follows:


Given a well-formed Unicode Collation Element Table, a conformant implementation shall replicate the same comparisons of Unicode strings as those produced by §4 Main Algorithm.

In particular, a conformant implementation must be able to compare any two canonical equivalent strings as being equal, for all Unicode characters supported by that implementation.


A conformant implementation shall support at least three levels of collation.

A conformant implementation is only required to implement three levels. However, it may implement four (or more) levels if desired.


A conformant implementation that supports backward levels, alternate weighting or rearrangement shall do so in accordance with this specification.

A conformant implementation is not required to support these features; however, if it does so, it must interpret them properly. Unless they are functioning in a very restricted domain, it is strongly recommended that implementations support a backwards secondary level, since this is required for French.

3 Collation Element Table

A Collation Element Table contains a mapping from one (or more) characters to one (or more) collation elements. A collation element is an ordered list of three 16-bit weights. (Implementations can produce the same result without using 16-bit weights — see §6 Implementation Notes.)

The first weight is called the Level 1 weight (or primary weight), the second is called the Level 2 weight (secondary weight), and the third is called the Level 3 weight (tertiary weight). For a collation element X, these can be abbreviated as X1, X2, and X3.Given two collation elements X and Y, we will use the following notation:

Equals Notation




X =1 Y

X is primary equal to Y

X1 = Y1

X =2 Y

X is secondary equal to Y

X =1 Y and X2 = Y2

X =3 Y

X is tertiary equal to Y

X =2 Y and X3 = Y3

X =4 Y

X is quarternary equal to Y

X =3 Y and X4 = Y4

 Less Than Notation




X <1 Y

X is primary less than Y

X1 < Y1

X <2 Y

X is secondary less than Y

X <1 Y or (X =1 Y and X2 < Y2)

X <3 Y

X is tertiary less than Y

X <2 Y or (X =2 Y and X3 < Y3)

X <4 Y

X is quarternary less than Y

X <3 Y or (X =3 Y and X4 < Y4)

Other operations are given their customary definitions in terms of these. That is:

Note: Where only plain text ASCII characters are available the following fallback notation can be used:
Notation Fallback
X <n Y X <[n] Y
Xn X[n]
X n Y X <=[n] Y
A B A == B

The collation algorithm results in a similar ordering among characters and strings, so that for two strings A and B we can write A <2 B, meaning that A is less than B and there is a primary or secondary difference between them. If A <2 B but A=1 B, we say that there is only a secondary difference between them. If two strings are equivalent (equal at all levels) according to a given Collation Table, we write A = B. If they are bit-for-bit identical, we write A B.

If a weight is 0000, then that collation element is ignorable at that level: the weight at that level is not taken into account in sorting. A collation element that is ignorable at Level 1, but not at Level 2 is called a Level 1 ignorable; similarly, a Level 2 ignorable is ignorable at Levels 1 and 2, but not Level 3; a Level 3 ignorable is ignorable at Levels 1, 2, and 3 but not Level 4; and so on. A collation element that is not ignorable at Level 1 is called a non-ignorable. A collation element with zeros at every level is called completely ignorable.

Except in special cases, no collation element can have a zero weight at Level N and a non-zero weight at Level N-1. Any collation elements that violate this rule are called ill-formed. The reason for this will be explained under Step 4 of the main algorithm.

For a given Collation Element Table, MINn is the least weight in any collation element at level n, and MAXn is the maximum weight in any collation element at level n.

The following are sample collation elements that are used in the examples illustrating the algorithm. Unless otherwise noted, all weights are in hexadecimal format.

Sample Table:


Collation Element


0300 "`" [0000.0021.0002] COMBINING GRAVE ACCENT
0061 "a" [06D9.0020.0002] LATIN SMALL LETTER A
0062 "b" [06EE.0020.0002] LATIN SMALL LETTER B
0063 "c" [0706.0020.0002] LATIN SMALL LETTER C
0043 "C" [0706.0020.0008] LATIN CAPITAL LETTER C
0064 "d" [0712.0020.0002] LATIN SMALL LETTER D

Weights in all examples are illustrative, and may not match what is in the latest Default Unicode Collation Element Table.

3.1 Linguistic Features

Linguistic requirements of collation are covered in more detail in The Unicode Standard, Version 3.0, Section 5.17 Sorting and Searching.

3.1.1 Multiple Mappings

The mapping from characters to collation elements may not be a simple mapping from one character to one collation element: in general, it may map from one to many, from many to one, or from many to many. For example: Expansions

The Latin letter æ is treated as an independent letter by default. Collations such as English, which may require treating it as equivalent to an <a e> sequence, can tailor the letter to map to a sequence of more than one collation elements, such as in the following example:



Collation Element


00E6 [06D9.0020.0002], [073A.0020.0002] LATIN SMALL LETTER AE; "æ"

In this example, the collation element [06D9.0020.0002] gives the weight values for a, and the collation element [073A.0020.0002] gives the weight values for e. Contractions

Similarly, where ch is treated as a single letter as in traditional Spanish, it is represented as a mapping from two characters to a single Collation Element, such as in the following example


Collation Element


[0707.0020.0002] LATIN SMALL LETTER C,

In this example, the collation element [0707.0020.0002] has a primary value one greater than the primary value for the letter c by itself, so that the sequence ch will collate after c and before d. The above example shows the result of a tailoring of collation elements to weight sequences of letters as a single unit.

Any character (such as soft hyphen) between two characters of a contraction will cause them to sort as separate characters.

Note: The Unicode Collation Algorithm can handle surrogate pairs as contractions. It thus provides the same level of capability for those characters as for non-surrogates. Other Multiple Mappings

Certain characters may both expand and contract: see Section 5.17 Sorting and Searching.

3.1.2 French Accents

In some languages (notably French), accents are sorted from the back of the string to the front of the string. This behavior is not marked in the Default Unicode Collation Element Table, but may occur in tailored tables. In such a case, the collation elements for the accents and their base characters are marked as being backwards at Level 2.

3.1.3 Rearrangement

Certain characters are not coded in logical order. In Unicode 2.1, these are the Thai vowels 0E40 through 0E44 and the Lao vowels 0EC0 through 0EC4 (this list may be extended in the future, and so is included in the Default Unicode Collation Element Table). For collation, they are rearranged by swapping with the following character before further processing, since logically they belong afterwards. For example, here is a string processed by rearrangement:

input string: 0E01 0E40 0E02 0E03
normalized string: 0E01 0E02 0E40 0E03

3.1.4 Default Values

Both in the Default Unicode Collation Element Table and in typical tailorings, most unaccented letters differ in the primary weights, but have secondary weights (such as a1) equal to MIN2. The primary ignorables will have secondary weights greater than MIN2. Characters that are compatibility or case variants will have equal primary and secondary weights (e.g. a1 = A1 and a2 = A2), but have different tertiary weights (e.g. a3 < A2). The unmarked characters will have tertiary weights (such as a3) equal to MIN3.

However, a well-formed Unicode Collation Element Table does not guarantee that the meaning of a secondary or tertiary weight is uniform across tables. For example, a capital A and katakana ta could both have a tertiary weight of 3.

3.1.5 Collation Graphemes

A collation ordering determines a collation grapheme (also known as a collation character), which is a sequence of characters that is treated as a primary unit by the ordering. For example, ch is a collation grapheme for a traditional Spanish ordering. These are generally contractions, but may include additional ignorable characters. To determine the boundaries for a collation grapheme starting at a given position, use the following process.

  1. Set oldPosition to be equal to position.
  2. If position is at the end of the string, return it.
  3. Fetch the next collation element(s) mapped to by the character(s) at position.
  4. If the collation element(s) contain a non-ignorable and position is not equal to oldPosition, return position.
  5. Otherwise set position to be the end of the characters mapped.
  6. Loop back to step 2.

For information on the use of collation graphemes, see UTR #18: Unicode Regular Expression Guidelines.

3.2 Default Unicode Collation Element Table

The Default Unicode Collation Element Table is available in three parts:

Note: Any code points that are not explicitly mentioned in those tables are given a derived collation element, as described in §7 Weight Derivation.

Note: A visual representation of the complete table can be found at http://www.unicode.org/unicode/reports/tr10/charts

This table is constructed to be consistent with the Unicode Canonical Equivalence algorithm, and to respect the Unicode character properties. It is not, however, merely algorithmically derivable from those data, since the assignment of levels does take into account characteristics of particular scripts. For example, in general the combining marks are Level 1 ignorables; however, the Indic combining vowels are given non-zero Level 1 weights, since they are as significant in sorting as the consonants.

Any character may have variant forms or applied accents which affect collation. Thus, for FULL STOP there are three compatibility variants, a fullwidth form, a compatibility form, and a small form. These get different tertiary weights, accordingly. For more information on how the table was constructed, see §7 Weight Derivation.

For many languages, some degree of tailoring is required to match user expectations.

Note: The precise values of the collation elements for the characters may change over time as new characters are added to the Unicode Standard. If a reference to the precise values is required, the version number must be referenced.

In particular, there are several characters whose values are known to be in error, and will change in the next version of the table. In addition, some changes will be necessary when the data is updated to include Unicode 3.0 characters.

3.2.1 File Format

Each of the files consists of a version line followed by an optional alternative-weight line, optional rearrangement lines, optional backwards lines, and a series of entries, all separated by newlines. A '#' and any following characters on a line are comments. Whitespace between literals is ignored. The following is an extended BNF description of the format, where "x+" indicates one or more x's, "x*" indicates zero or more x's, "x?" indicates zero or one x, and <char> is a hexadecimal Unicode code value.

<collationElementTable> := <version> 





The version line is of the form:

@<version> := <major>.<minor>.<variant> <eol>

The rearrangement line is of the following form. It specifies the characters that are to be rearranged in collation, as discussed above in §3.1.3 Rearrangement.

<rearrangement> := '@rearrange' <charList> <eol>

<charList>      := <item> ("," <item> )*

In general, the rearrangement lines are determined by the version of the Unicode Standard, since these are properties always associated with certain characters. For Unicode 3.0, they are the following:

@rearrange 0E40,0E41,0E42,0E43,0E44

@rearrange 0EC0,0EC1,0EC2,0EC3, 0EC4

The alternate-weight line has three possible values that may change the weights of collation elements in processing (see §3.2.2 Alternate Collation Elements). The default is shifted.

<alternate>       := '@alternate ' <alternateChoice> <eol>

<alternateChoice> := 'blanked' | 'non-ignorable' | 'shifted'

A backwards line lists a level that is to be processed in reverse order. A forwards line does the reverse. The default is for lines to be forwards.

<backwards> := ('@backwards ' | '@forwards ') <levelNumber> <eol>

Each entry is a mapping from character(s) to collation element(s), and is of the following form:

<entry>       := <charList> ';' <collElement>+ <eol>

<collElement> := "[" <alt> <char> "." <char> "." <char> ("." <char>)* "]"

<alt>         := "*" | "."

In the Default Unicode Collation Element Table, the comment may contain informative tags: CANONSEQ usually indicates a canonical equivalence, and COMPATSEQ usually indicates a compatibility equivalence. (There are cases where characters do not actually have the associated equivalences, but behave as if they do.)

Here are some selected entries:

0020 ; [*0209.0020.0002.0020] % SPACE

02DA ; [*0209.002B.0002.02DA] % RING ABOVE; COMPATSEQ

0041 ; [.06D9.0020.0008.0041] % LATIN CAPITAL LETTER A

3373 ; [.06D9.0020.0017.0041] [.08C0.0020.0017.0055] % SQUARE AU; COMPATSEQ


212B ; [.06D9.002B.0008.212B] % ANGSTROM SIGN; CANONSEQ

0042 ; [.06EE.0020.0008.0042] % LATIN CAPITAL LETTER B

0043 ; [.0706.0020.0008.0043] % LATIN CAPITAL LETTER C

0106 ; [.0706.0022.0008.0106] % LATIN CAPITAL LETTER C WITH ACUTE; CANONSEQ

0044 ; [.0712.0020.0008.0044] % LATIN CAPITAL LETTER D

The entries in each file are ordered by collation element, not by character. This makes it easy to see the order in which characters would be collated. Although this document describes collation elements as three levels, the file contains a fourth level (as in [.0712.0020.0008.0044]) which is computable. For more information on that, see §7 Weight Derivation.

Implementations can also add more customizable levels, as discussed above under conformance. For example, an implementation might want to be capable not only of handling the standard Unicode Collation, but also capable of emulating an EBCDIC multi-level ordering (having a fourth-level EBCDIC binary order).

3.2.2 Alternate Weighting

Collation elements that are marked with an asterisk in a Unicode Collation Element Table are known as variable collation elements.


Collation Element


0020 " " [*0209.0020.0002] SPACE

Based on the setting of the alternate weighting tag, collation elements can be reweighted in the following ways, with the default being Shifted:

Note: The shifted option provides for improved orderings when the variable collation elements are ignorable, while still using only requiring three fields to be stored in memory for each collation element. It does result in somewhat longer sort keys, although they can be compressed (see §6.1 Reducing Sort Key Lengths and §6.3 Reducing Table Sizes).

The following gives an example of the differences between orderings using the different options for variable collation elements. In this example, sample strings differ by the third character: a letter, space, '-' hyphen-minus (002D), or '-' hyphen (2010); followed by an uppercase/lowercase distinction. In the first column below, the words with hyphen-minus and hyphen are separated by deluge, since an l comes between them in Unicode code order. In the second column, they are grouped together but before all letters in the third position. This is because they are no longer ignorable, and have primary values that differ from the letters. In the third column, the hyphen-minus and hyphen are grouped together, and their differences are less significant than between the deluge. In this case, it is because they are ignorable, but their fourth level differences are according to the original primary order, which is more intuitive than Unicode order.





de luge

de Luge


de luge
de Luge


de luge

de Luge


de luge

de Luge


Implementations that support alternate weighting do not have to support interleaved primary weights. That is, an implementation can assume that

For any two collation elements V and N, where A has is variable and N is not:

This allows for more compact storage of memory tables. Rather than using a bit per collation element to determine whether the collation element is variable, the implementation only needs to store the maximum primary value for all the variable elements. All collation elements with primary weights from 1 to that maximum are variables; all other collation elements are not.

4 Main Algorithm

The main algorithm has four steps. First is to normalize each input string, second is to produce an array of collation elements for each string, and third is to produce a sort key for each string from the collation elements. Two sort keys can then be compared with a binary comparison; the result is the ordering for the original strings.

4.1 Normalize each input string

Step 1. Produce a normalized form of each input string, applying the following two steps:

1.1. Use the Unicode canonical algorithm to decompose characters according to the canonical mappings. That is, put the string into Normalization Form D (see UTR #15: Unicode Normalization Forms).

1.2. If any character is marked as rearranging (see §3.1.3 Rearrangement), swap it and the succeeding character (if there is one). In practice, rearranging characters should never appear adjacent to one another. If for some reason they do, then successive pairs in the sequence will be swapped.

For example, if digits 1-4 were rearranging, then "1x...12...123y" would result in  "x1...21...21y3"


input string:


normalized string:


4.2 Produce an array of collation elements for each string

Step 2. First we define a combining mark in a string to be blocked if there is another combining mark of the same canonical combining class or zero between it and its base character.

The collation element array is built by sequencing through the normalized form as follows:

2.1. Find the longest initial substring S at each point that has a match in the table.

2.1.1. If there are any combining marks following S, process each combining mark C.

2.1.2. If C is not blocked, find if S + C has a match in the table.

2.1.3. If there is a match, replace S by S + C, and remove C.

2.4. Fetch the corresponding collation element(s) from the table if there is a match. If there is no match, synthesize a weight as described in §7.1 Derived Collation Elements

2.5. Process collation elements according to the alternative-weight setting, as described in §3.2.2 Alternate Weighting.

2.6. Append the collation element(s) to the collation element array.

2.7. Proceed to the next point in the string (past S).

2.8. Loop until the end of the string is reached.

Conformant implementations may skip steps 2.1.1 through 2.1.3 if their repertoire of supported character sequences does not require this level of processing.

Note: The reason for considering the extra combining marks C is that otherwise irrelevant characters could interfere with matches in the table. For example, suppose that the contraction <a, combining_ring> (= å) is ordered after z. If a string consists of the three characters <a, combining_ring, combining_cedilla>, then the normalized form is <a, combining_cedilla, combining_ring>, which separates the a from the combining_ring. If we didn't have the step of considering the extra combining marks, this string would compare incorrectly as after a and not after z.

If the desired ordering treats <a, combining_cedilla> as a contraction which should take precedence over <a, combining_ring>, then an additional mapping for the combination <a, combining_ring, combining_cedilla> can be introduced to produce this effect.

Note: For conformance to Unicode canonical equivalence, only unblocked combining marks are matched. For example, <a, combining_macron, combining_ring> would compare as after a-macron, and not after z. As in the previous note, additional mappings can be added to customize behavior.


normalized string: ca´b
collation element array: [0706.0020.0002], [06D9.0020.0002], [0000.0021.0002], [06EE.0020.0002]

4.3 Form a sort key for each string

Step 3. The sort key is formed by successively appending weights from the collation element array. The weights are appended from each level in turn, from 1 to 3. (Backwards weights are inserted in reverse order.)

An implementation may allow the maximum level to be set to a smaller level than the available levels in the collation element array. For example, if the maximum level is set to 2, then level 3 and higher weights (including the normalized Unicode string) are not appended to the sort key. Thus any differences at levels 3 and higher will be ignored, leveling any such differences in string comparison.

Here is a more detailed statement of the algorithm:

3.1. For each weight level L from 1 to the maximum level in the collation element array,

3.2. If L is not 1, append a level separator

3.3. If the collation element table is forwards at level L,

3.4. For each collation element CE in the array

3.5. Append CEL to the sort key if CEL is non-zero.

3.6. Else the collation table is backwards at level L, so

3.7. Form a list of all the non-zero CEL values.

3.8. Reverse that list

3.9. Append the CEL values from that list to the sort key.

Note: The level separator is zero (0000), which is guaranteed to be lower than any weight in the resulting sort key. This guarantees that when two strings of unequal length are compared, where the shorter string is a prefix of the longer string, the longer string is always sorted after the shorter (in the absence of special features like contractions). For example:

"abc" < "abcX" where "X" can be any character(s)


collation element array: [0706.0020.0002], [06D9.0020.0002], [0000.0021.0002], [06EE.0020.0002]
sort key: 0706 06D9 06EE 0000 0020 0020 0021 0020 0000 0002 0002 0002 0002

4.4 Compare the sort keys

Step 4. Compare the sort keys for each of the input strings, using a binary comparison. This means that:



Sort Key

cab 0706 06D9 06EE 0000 0020 0020 0020 0000 0002 0002 0002
Cab 0706 06D9 06EE 0000 0020 0020 0020 0000 0008 0002 0002
cáb 0706 06D9 06EE 0000 0020 0020 0021 0020 0000 0002 0002 0002 0002
dab 0712 06D9 06EE 0000 0020 0020 0020 0000 0002 0002 0002

In this example, "cab" <3 "Cab" <2 "cáb" <1 "dab". The differences that produce the ordering are shown by the bold underlined items:

Note: At this point we can explain the reason for disallowing ill-formed weights. If ill-formed weights were allowed, the ordering of elements can be incorrectly reflected in the sort key. For example, suppose the secondary weights of the Latin characters were zero (ignorable) and that (as normal) the primary weights of case-variants are equal: that is, a1 = A1. Then the following incorrect keys would be generated:

  1. "áe" = <a, acute, e> => [a1 e1 0000 acute2 0000 a3 acute3 e3...]
  2. "Aé" = <A, e, acute> => [a1 e1 0000 acute2 0000 A3 acute3 e3...]

Since the secondary weights for a, A, and e are lost in forming the sort key, the relative order of the acute is also lost, resulting in an incorrect ordering based solely on the case of A vs a. With well-formed weights, this does not happen, and you get the following correct ordering:

  1. "áe" = <A, e, acute> => [a1 e1 0000 a2 e2 acute2 0000 a3 acute3 e3...]
  2. "Aé" = <a, acute, e> => [a1 e1 0000 a2 acute2 e2 0000 A3 acute3 e3...]

However, there are circumstances--typically in expansions--where higher-level weights in collation elements can be zeroed (resulting in ill-formed collation elements) without consequence (see §6.2 Large Weight Values). Implementations are free to do this as long as they produce the same result as with well-formed tables.

5 Tailoring

Tailoring is any well-defined syntax that takes the Default Unicode Collation Element Table and produces another well-formed Unicode Collation Element Table. Such syntax will usually allow for the following capabilities:

  1. Reordering any character (or contraction) with respect to others in the standard ordering. Such a reordering can represent a Level 1 difference, Level 2 difference, Level 3 difference, or identity (in levels 1 to 3). Since such reordering includes sequences, arbitrary multiple mappings can be specified.

  2. Setting levels to be backwards (French) or forwards (normal). Typically this is only needed for the secondary level.

  3. Set alternate weighting options.

  4. Customizing the exact list of rearranging characters.

  5. Customizing the exact list of variable collation elements.

5.1 Preprocessing

In addition to tailoring, some implementation may choose to preprocess the text for special purposes. Once such preprocessing is done, the standard algorithm can be applied.

Examples include:

Such preprocessing is outside of the scope of this document.

6 Implementation Notes

As noted above for efficiency, implementations may vary from this logical algorithm so long as they produce the same result. The following items discuss various techniques that can be used for reducing sort key length, reducing table sizes, customizing for additional environments, searching, and other topics.

6.1 Reducing Sort Key Lengths

The following discuss methods of reducing sort key lengths. If these methods are applied to all of the sort keys produced by an implementation, they can result in significantly shorter and more efficient sort keys while retaining the same ordering.

6.1.1 Eliminating level separators

Level separators are not needed between two levels in the sort key, if the weights are properly chosen. For example, if all L3 weights are less than all L2 weights, then no level separator is needed between them. If there is a fourth level, then the separator before it needs to be retained.

For example, here is a sort key with these level separators removed.


Sort Key

càb (0) 0706 06D9 06EE 0000 0020 0020 0021 0020 0000 0002 0002 0002 0002
càb (1) 0706 06D9 06EE 0020 0020 0021 0020 0002 0002 0002 0002

While this technique is relatively easy to implement, it can interfere with other compression methods.

6.1.2 L2/L3 in 8 bits

The L2 and L3 weights commonly are small values. Where that condition occurs for all possible values, they can then be represented as single 8-bit quantities.

Here is the above example with both these changes (and grouping by bytes). Note that the separator has to remain after the primary weight when combining these techniques. If any separators are retained (such as before the fourth level), they need to have the same width as the previous level.


Sort Key

càb (0) 07 06 06 D9 06 EE 00 00 00 20 00 20 00 21 00 20 00 00 00 02 00 02 00 02 00 02
càb (1,2) 07 06 06 D9 06 EE 00 00 20 20 21 20 02 02 02 02

6.1.3 Machine Words

The sort key can be represented as an array of different quantities depending on the machine architecture. For example, comparisons as arrays of 32-bit quantities may be much faster on some machines. If this is done, the original is to be padded with trailing (not leading) zeros as necessary.


Sort Key

càb (1,2) 07 06 06 D9 06 EE 00 00 20 20 21 20 02 02 02 02
càb (1,2,3) 070606D9 06EE0000 20202120 02020202

6.1.4 Run-length Compression

Generally sort keys don't differ much in the secondary or tertiary weights, so you tend to end up with keys with a lot of repetition. This also occurs with quarternary weights generated with the shifted parameter. By the structure of the collation element tables, there are also many weights that are never assigned at a given level in the sort key. You can take advantage of these regularities in these sequences to compact the length — while retaining the same sort sequence — by using the following technique. (There are other techniques that can also be used.)

This is a logical statement of the process: the actual implementation can be much faster and performed as the sort key is being generated.


Original Weights

Compressed Weights



77 01

77 02

77 77 01

77 77 02

77 77 77 01

77 77 77 02


77 77 77 FE

77 77 77 FF

77 77 FE

77 77 FF

77 FE

77 FF




03 01

03 02

04 01

04 02

05 01

05 02










The result of this process are keys that are never greater than the original, are generally much shorter, and result in the same comparisons.

6.2 Large Weight Values

If a collation sequence requires more than 65,535 weight values (or 65,024 values where zero bytes are avoided), this can still be accommodated by using multiple collation elements for a single character. For example, suppose that 50,000 UTF-16 (surrogate) private use characters are assigned in a particular implementation, and that these are to be sorted after X. Simply assign them all dual collation elements of the form

[X1+1).0000.0000], [yyyy.zzzz.wwww]

They will then sort properly with respect to each other and to the rest of the characters. (The first collation element is one of the instances where ill-formed collation elements are allowed. Since the second collation element is well-formed and the first element will only occur in combination, ordering is preserved.)

6.3 Reducing Table Sizes

The data tables required for full Unicode sorting can be quite sizable. This section discusses ways to significantly reduce the table size in memory. These have very important implications for implementations.

6.3.1 Contiguous Weight Ranges

The Default Unicode Collation Element Table has secondary weights that are greater than 00FF. This is the result of the derivation described in §7 Weight Derivation. However, these values can be compacted to a range of values that don't exceed 00FF. Whenever collation elements have different primary weights, the ordering of their secondary weights is immaterial. Thus all of the secondaries that share a single primary can be renumbered to a contiguous range without affecting the resulting order. Composite characters still need to be handled correctly if normalization is avoided as discussed in §7 Weight Derivation.

For example, for the primary value 0820 (for the letter O), there are 31 distinct secondary values ranging from 0020 to 012D. These can be renumbered to the contiguous range from 0020 to 003F, which is less than 00FF.

6.3.2 Escape Hatch

Although the secondary and tertiary weights for the Default Unicode Collation Element Table can both fit within one byte, of course, any particular tailored table could conceivably end up with secondary or tertiary weights that exceed what can be contained in a single byte. However, the same technique used for large weight values can also be used for implementations that do not want to handle more than 00FF values for a particular weight.

For example, the Java collation implementation only stores 8-bit quantities in level 2 and level 3. However, characters can be given L2 or L3 weights with greater values by using a series of two collation elements. For example, with characters requiring 2000 weights at L2, then 248 characters can be given single keys, while 1792 are given 2 collation keys of the form [yyyy.00zz.00ww] [0000.00nn.0000]. (The 248 can be chosen to be the higher frequency characters!)

6.3.3 Leveraging Unicode Tables

Since all canonically decomposable characters are decomposed in Step 1.1, no collation elements need to be supplied for them. This includes a very large number of characters, not only a large number of Latin and Greek characters, but also the very large number of Hangul Syllables.

Since most compatibility decomposable characters in the default table can be algorithmically generated from the decomposition, no collation elements need to be stored for those decomposable characters: the collation elements can be generated on the fly with only a few exceptions entered in the table. The collation elements for the Han characters (unless tailored) are algorithmically derived; no collation elements need to be stored for them either. For more information, see §7 Weight Derivation.

This means that only a fraction of the total number of Unicode characters needs to have an explicit collation element associated with them. This can cut down the memory storage considerably.

6.3.4 Reducing the Repertoire

If characters are not fully supported by an implementation, then their code points can be treated as if they were unassigned. This allows them to be algorithmically constructed from code point values instead of including them in a table. This can significantly reduce the size of the required tables. See §7.1 Derived Collation Elements for more information.

6.3.5 Memory Table Size

Applying the above techniques, an implementation can thus safely pack all of the data for a collation element into a single 32-bit quantity: 16 for the primary, 8 for the secondary and 8 for the tertiary. Then applying techniques such as the Two-Stage table approach described in Section 5.7 of The Unicode Standard, Version 2.0, the mapping table from characters to collation elements can both fast and small. For an example of how this can be done, see §6.11 Flat File Example.

6.4 Avoiding Zero Bytes

If the resulting sort key is to be a C-string, then zero bytes must be avoided. This can be done by:

6.5 Avoiding Normalization

Implementations that do not handle separate combining marks can map precomposed characters (such as "à") to single collation elements with different Level 2 weights for the different accents. For more information, see §7 Weight Derivation. However, this does required including the mappings for these characters in the collation table, which will increase the size substantially unless the collation elements for the Hangul Syllables are computed algorithmically.

6.6 Case Comparisons

In some languages, it is common to sort lowercase before uppercase; in other languages this is reversed. Often this is more dependent on the individual concerned, and is not standard across a single language. It is strongly recommended that implementations provide parameterization that allow uppercase to be sorted before lowercase, and provide information as to the standard (if any) for particular countries. This can easily be done to the Default Unicode Collation Element Table before tailoring by remapping the L3 weights (see §7 Weight Derivation). It can be done after tailoring by finding the case pairs and swapping the collation elements.

6.7 Incremental Comparison

Implementations do not actually have to produce full sort keys. Collation elements can be incrementally generated as needed from two strings, and compared with an algorithm that produces the same results as sort keys would have. The choice of which algorithm to use depends on the number of comparisons between the same strings.

However, it is very tricky to produce an incremental comparison that produces correct results. For example, some implementations have not even been transitive! Be sure to test any code for incremental comparison thoroughly.

6.8 Searching

The collation elements can also be used for searching, so that a proper native-language match is produced. For example, "ß" will properly match against "ss". (Note that the lengths of the matching strings may differ!) Users of search algorithms should be allowed to modify the comparison strength, thus excluding differences at less significant levels. This is especially useful for searching, but can also apply to comparison.

Excluding differences at Level 3 has the effect of ignoring case and compatibility format distinctions between letters when searching. Excluding differences at Level 2 has the effect of ignoring accentual distinctions when searching.

6.9 Catching Mismatches

Sort keys from two different tailored collations cannot be compared, since the weights may end up being rearranged arbitrarily. To catch this case, implementations can produce a hash value from the collation data, and prepend it to the sort key. Except in extremely rare circumstances, this will distinguish the sort keys. The implementation then has the opportunity to signal an error.

6.10 Tailoring Example: Java

Java 2 implements a number of the tailoring features described in this document. The following summarizes these features (for more information, see Collator on http://java.sun.com/products/jdk/1.2/docs/api/).

1. Java doesn't use a default table in the Unicode Collation Element format: instead it always uses a tailoring syntax. Here is a description of the entries:

Syntax Description
 & y < x Make x primary-greater than y
 & y ; x Make x secondary-greater than y
 & y , x Make x tertiary-greater than y
 & y = x Make x equal to y

Either x or y can be more than one character, to handle contractions and expansions. NULL is completely ignorable, so by using the above operations, various levels of ignorable characters can be specified.

2. Entries can be abbreviated in a number of ways:

These can be done successively, so the following are equivalent in ordering.



Unicode Collation Element Table

 a, A ; à, À < b, B
0061 ; [.0001.0001.0001] % a

0040 ; [.0001.0001.0002] % A

00E0 ; [.0001.0002.0001] % à

00C0 ; [.0001.0002.0002] % à

0042 ; [.0002.0001.0001] % b

0062 ; [.0002.0001.0002] % B

6.11 Flat File Example

The following is a sample flat-file binary layout and sample code for collation data. It is included only for illustration. The table is used to generate collation elements from characters, either going forwards or backwards, and detect the start of a contraction. The backwards generation is for searching backwards or Boyer-Moore-style searching; the contraction detection is for random access.

In the file representation, ints are 32 bit values, shorts are 16, bytes are 8 bits. Negatives (not that we have any) are two's-complement. For alignment, the ends of all arrays are padded out to multiples of 32 bits. The signature determines endianness. The locale uses an ASCII representation for the Java locale: a 2 byte ISO language code, optionally followed by '_' and 2 byte ISO country code, followed optionally by a series of variant tags separated by '_'; any unused bytes are zero.

Data Comment
int signature; Constant 0x636F6C74, used also for big-endian detection
int tableVersion; Version of the table format
int dataVersion; Version of the table data
byte[32] locale; Target locale (if any)
int flags; Bit01 = 1 if French secondary
Others are reserved
int limitVariable; Every ce below this value that has a non-zero primary is variable. Since variables are not interleaved, this does not need to be stored on a per-character basis.
int maxCharsPerCE; Maximum number of characters that are part of a contraction
int maxCEsPerChar; Maximum number of collation elements that are generated by an expansion
int indexOffset; Offset to index table
int collationElementsOffset; Offset to main data table
int expansionsOffset; Offset to expansion table
int contractionMatchOffset; Offset to contraction match table
int contractionResultOffset; Offset to contraction values table
int nonInitialsOffset; Offset to non-initials table. These are used for random access.
int[10] reserved; Reserved
int indexLength; Length of following table
int[] index; Index for high-byte (trie) table. Contains offsets into Collation Elements. Data is accessed by:
ce = collationElements[index[char>>8]+char&0xFF]
int collationElementsLength; Length of following table
int[] collationElements; Each element is either a real collation element, an expansionsOffset, or an contractionsOffset. See below for more information.
int expansionsLength; Length of following table
int[] expansions; The expansionOffsets in the collationElements table point into sublists in this table. Each list is terminated by FFFFFFFF.
int contractionMatchesLength; Length of following table
short[] contractionMatches; The contractionOffsets in the collationElements table point into sublists in this table. Each sublist is of the following format:
short backwardsOffset; In case we are going backwards, offset to true contractions table.
short length; Number of chars in list to search
short[] charsToMatch; characters in sorted order.
int contractionCEsLength; Length of following table
int[] contractionCEs; List of CEs. Each corresponds to a position in the contractionChars table. The one corresponding to the length in a sublist is the bail-out; what to do if a match is not found.
int nonInitialsLength; Length of following table
short[] nonInitials; List of characters (in sorted order) that can be non-initials in contractions. That is, if "ch" is a contraction, then "h" is in this list. If "abcd" is a contraction, then "b", "c", and "d" are in the list.

6.11.1 Collation Element Format

An alternative structure would be to have the offsets be not indexes into the arrays, but byte offsets from the start of the table. That would limit the size of the table, but use fewer machine instructions.

6.11.2 Sample Code

The following is a pseudo code using this table for the required operations. Although using Java syntax in general, the code example uses arrays so as to be more familiar to users of C and C++. The code is presented for illustration only, and has not been tested.

There is also sample Java code and a demonstration applet available at http://www.unicode.org/unicode/reports/tr10/Sample/. That code is not designed to use a flat-file format.

char[] input;   // input buffer (i)

int inputPos;   // position in input buffer (io)

int[] output;   // output buffer (o)

int outputPos;  // position in output buffer (io)

boolean forwards;   // 0 for forwards, 1 for backwards (i)



* Reads characters from input, writes collation elements in output


void getCollationElements() {

    char c = input[inputPos++];

    int ce = collationElements[index[c>>8] + c&0xFF];





* Normally just returns ce. However, special forms indicate that

* the ce is actually an expansion, or that we have to search

* to see if the character was part of a contraction.

* Expansions use 


void processCE(int ce) {

    if (ce < 0xFFF00000) {

        output[outputPos++] = ce;

    } else if (ce >= 0xFFE00000) {

        copyExpansions(ce & 0x7FFFFF);

    } else {

        searchContractions(ce & 0x7FFFFF);





* Search through a contraction sublist to see if there is a match.

* Since the list is sorted, we can exit if our value is too high.<p>

* Since we have a length, we could implement this as a

* binary search, although we don't right now.<p>

* If we do find a match, we need to recurse. That's how "abc" would

* be handled.<p>

* If we fail, we return the non-matching case. That can be an expansion

* itself (it would never be a contraction).


void searchContractions(int offset) {

    if (forwards) inputPos++;

    else offset += input[inputPos++];

    short goal = (short)input[inputPos++];

    int limit = offset + contractionMatches[offset];

    for (int i = offset; i < limit; ++i) {

        short cc = contractionMatches[i];

        if (cc > goal) { // definitely failed



        } else if (cc == goal) { // found match








* Copy the expansion collation elements up to the terminator.

* Don't use 00000000 as a terminator, since that may be a valid CE.

* These elements don't recurse.


void copyExpansions (int offset) {

    int ce = expansions[offset++];

    while (ce != 0xFFFFFFFF) {

        output[outputPos++] = ce;

        ce = expansions[offset++];





* For random access, gets the start of a collation element.

* Any non-initial characters are in a sorted list, so

* we just check that list.<p>

* Since we have a length, we could implement this as a

* binary search, although we don't right now.


int getCollationElementStart(char[] buffer, int offset) {

    int i;


    for (i = offset; i > 0; --i) {

        char c = buffer[i];

        for (int j = 0; j < nonInitialsLength; ++j) {

            char n = nonInitials[j];

            if (c == n) continue main;

            if (c > n) break main;




    return i;


7 Weight Derivation

This section describes the generation of the Unicode Default Unicode Collation Element Table, and the assignment of weights to code points that are not explicitly mentioned in a Collation Element Table. This uses information from the Unicode Character Database on http://www.unicode.org/Public/UNIDATA/UnicodeData.txt (and documented in http://www.unicode.org/Public/UNIDATA/UnicodeData.html).

7.1 Derived Collation Elements

CJK Ideographs and Hangul Syllables are not explicitly mentioned in the default table. CJK ideographs are mapped to collation elements that are derived from their Unicode code point value. The primary weight is equal to their Unicode character value. Their secondary and tertiary values are the respective minimal values for those levels: in the Default Unicode Collation Element Table, these are 0020 and 0002 respectively. All other levels, if any, are 0001. (Since all distinct codepoints have different primary weights, the exact values don't matter as long as they are non-zero.)

The collation algorithm requires that Hangul Syllables be decomposed. However, if the table is tailored so that the primary weights for Hangul Jamo (and all related characters) are adjusted, then the Hangul Syllables can be left precomposed and treated in the same way as CJK ideographs. That will provide a collation which is approximately the same as UCA, and may be sufficient in environments where individual jamo are not expected.

The adjustment is to move each initial jamo (and related characters) to have a primary weights corresponding to the first syllables starting with that jamo, and make all non-initial jamo (and related characters) be ignorable at a primary level.

7.1.1 lllegal code points

Certain codepoints are illegal in a data stream. These include non-characters (codepoints with hex values ending in FFFF or FFFE), unpaired surrogates (codepoints between D800 and DFFF), and out-of-range values (< 0 or > 10FFFF). Implementations may also choose to treat these as error conditions and respond appropriately, such as by throwing an exception.

If they are not treated as an error condition, they must be mapped to [.0000.0000.0000.], and thus ignored.

7.1.2 Legal code points

A legal codepoint that is not explicitly mentioned in the table is mapped a sequence of two collation elements in the following way. The result of this process are collation elements that are sorted in codepoint order, that do not collide with any explicit values in the table, and that can be placed anywhere (e.g. at UNDEFINED) with respect to the explicit collation element mappings (by default, they go after all explicit collation elements).

To derive the collation elements, the codepoint CP is separated into two parts, chosen for the right numerical properties. First, separate off the top 6 bits of the codepoint. Since codepoints can go from 0 to 10FFFF, this will have values from 0 to 2116 (= 3310). Add this to the special value UNDEFINED.

AAAA = UNDEFINED + (CP >> 15);

Now take the bottom 15 bits of the code point. Turn the top bit on, so that the value is non-zero.

BBBB = (CP & 0x7FFF) | 0x8000;

The mapping given to CP is then given by:

CP => [.AAAA.0001.0001.][.BBBB.0000.0000.]

If a fourth or higher weights are used, then the same pattern is used: they are set to 0001, etc. in the first collation element and 0000 in the second. (Since all distinct codepoints have different AAAA/BBBB combination, the exact values don't matter as long as they are non-zero in the first collation element.)

The value for UNDEFINED for the Default Default Unicode Collation Element Table is FF80. This is larger than any explicit primary weight, and thus will not collide with explicit weights. It is not generally necessary to tailor this value to be within the range of explicit weights. However if this is done, the explicit primary weights must be shifted so that none are between UNDEFINED and UNDEFINED + 34.

7.2 Canonical Decompositions

Characters with canonical decompositions do not require mappings to collation elements, because Step 1.1 maps them to collation elements based upon their decompositions. However, they may be given mappings to collation elements anyway. The weights in those collation elements must be computed in such a way they will sort in the same relative location as if the characters were decomposed using Normalization Form D. By including these mappings, this allows an implementation handling a restricted repertoire of supported characters to compare strings correctly without performing the normalization in Step 1.1 of the algorithm.

A combining character sequence is called impeding if it contains any conjoining Jamo, or if it contains an L1-ignorable combining mark and there is some character that canonically decomposes to a sequence containing the same base character. For example, the sequence <a,cedilla> is an impediment, since cedilla is an L1-ignorable character, and there is some character, e.g. a-grave, that decomposes to a sequence containing the same base letter a. Note that although strings in Normalization Form C generally don't contain impeding sequences, there is nothing prohibiting them from containing them.

Conformant implementations that do not support impeding character sequences as part of their repertoire can avoid performing Normalization Form D processing as part of collation.

The computed weights for canonically decomposible characters are derived in the following way:

If French reordering is available, then an alternate second-level weight needs to be computed for any sequence of non-spacing marks. This alternate weight effectively reverses the order of the non-spacing marks. This can be done at run-time with a small lookup table.

Here is an example of how this works with the Default Unicode Collation Element Table. The following strings have the given ordering:

a < a-acute < a-grave < a-acute+a

This is based on the following sort keys:

0061 => 06CF.0000.0020.0000...

00E1 => 06CF.0000.0020.0032.0000...

00E0 => 06CF.0000.0020.0035.0000...

00E1,0061 => 06CF.06CF.0000.0020.0032.0020.0000...

If an implementation requires that all input strings are in Form C and do not contain impeding sequences, then the Normalization of Step 1.1 is can be skipped. The following sort keys result. Although the keys are different, the resulting ordering is the same.

0061 => 06CF.0000.0020.0000...

00E1 => 06CF.0000.0032.0000...

00E0 => 06CF.0000.0035.0000...

00E1,0061 => 06CF.06CF.0000.0020.0032.0000...

7.3 Compatibility Decompositions

As remarked above, most characters with compatibility decompositions can have collation elements computed at runtime to save space, duplicating the work that was done to compute the Default Unicode Collation Element Table. This can be an important savings in memory space. The process works as follows.

1. Derive the decomposition. e.g.

2475 PARENTHESIZED DIGIT TWO => 0028, 0032, 0029

2. Get the CE for each character in the decomposition.

0028 [*023D.0020.0002.0028] % LEFT PARENTHESIS

0032 [.06C8.0020.0002.0032] % DIGIT TWO

0029 [*023E.0020.0002.0029] % RIGHT PARENTHESIS

3. Set L4 in each CE to the original character.

0028 [*023D.0020.0002.2475] % LEFT PARENTHESIS

0032 [.06C8.0020.0002.2475] % DIGIT TWO

0029 [*023E.0020.0002.2475] % RIGHT PARENTHESIS

4. Set L3 in each CE to lookup(L3), where the lookup uses the table in §7.3.1 Tertiary Weight Table.

0028 [*023D.0020.0004.2475] % LEFT PARENTHESIS

0032 [.06C8.0020.0004.2475] % DIGIT TWO

0029 [*023E.0020.0004.2475] % RIGHT PARENTHESIS

5. Concatenate the result to produce the sequence of collation elements that the character maps to.

2475 [*023D.0020.0004.2475] [.06C8.0020.0004.2475] [*023E.0020.0004.2475] 

Some characters cannot be computed in this way. They must be filtered out of the default table and given specific values. An example is:

017F ; [.085D.00FD.0004.017F] % LATIN SMALL LETTER LONG S; COMPAT

7.3.1 Tertiary Weight Table

Characters without decompositions are given tertiary weights according to their General Category in the Unicode Character Database, as one of the following values

General Category


Lu (uppercase Letter)


anything else


These are the original L3 weights in the decomposition. These are mapped to the following values in computing the lookup mentioned above.

Original Weight Compability Tag Applicable Ranges Resulting Weight


 NONE    0002
 <wide>    0003
 <compat>    0004
 <font>    0005
 <circle>    0006
 NONE small hiragana (3041, 3043,...  000D
 NONE normal hiragana (3042, 3044, ...)  000E
 <small> small katakana (30A1, 30A3,...)  000F
 <narrow> small narrow katakana (FF67..FF6F)  0010
 NONE normal katakana (30A2, 30A4, ...)  0011
 <narrow> narrow katakana (FF71..FF9D)  0012
 <circle> circled katakana (32D0..32FE)  0013
 <super>    0014
 <sub>    0015
 <vertical>    0016
 <initial>    0017
 <medial>    0018
 <final>    0019
 <isolated>    001A
 <noBreak>    001B
 <square>    001C
 <fraction>    001E


 NONE    0008
 <wide>    0009
 <compat>    000A
 <font>    000B
 <circle>    000C
 <square>    001D

(For historical reasons, the value 0007 is never mapped to.)


Thanks to Karlsson Kent and Richard Gillam for their feedback on this document.


[CanStd] CAN/CSA 2243.4.1
[SoStd] ISO/IEC 14651 FCD3


The following summarizes modifications from the previous version of this document.

  • Revised Header for UTS
  • §1 Scope: added notice about changes in 3.0
  • §3 Collation Element Table: fixed definition of notation in the first part
  • §3.2.1 File Format: fixed version syntax in the data file for consistency, added contracting characters to the default table
  • §3.2.2 Alternate Weighting: added ShiftedTrimmed option to emulate POSIX behavior
  • §4 Main Algorithm: clarified Step 1.2 and Step 2.4
  • §7.1 Derived Collation Elements: added out-of-range values, made clear that implementations can throw exceptions, and fixed format of paired weights derived from legal code points
  • §8 Frequently Asked Questions: moved to the Unicode FAQ on Collation
  • Minor editing

Copyright © 1998-2000 Unicode, Inc. All Rights Reserved. The Unicode Consortium makes no expressed or implied warranty of any kind, and assumes no liability for errors or omissions. No liability is assumed for incidental and consequential damages in connection with or arising out of the use of the information or programs contained or accompanying this technical report.

Unicode and the Unicode logo are trademarks of Unicode, Inc., and are registered in some jurisdictions.